Trianglelab Ceramic Heating Core KIT(Built-in K500 Thermocouple)
▉Technical details:Please click here!
▉K500 thermocouples:Please click here!
▉Compatible:
V5/V6 Hotend,CR10 Hotend,Hemera Hotend,Matrix Extruder,Titan Aero,DDB V6 Hotend KIT,TD6 Hotend,TD6S Hotend,TR6 Hotend,CHC Mini Hotend.
Supports temperatures up to 300℃
ID09L08-60W ceramic heater power test
Roomtemperature 24℃
Controller BoardMKS BASE V1.4
Resistance at room temperature 9~10Ω 24V 57.6~64W
Resistance at room temperature 3~4Ω 12V 36~48W
Controller Boardpowervoltage24V DC
Firmware marlin2.0
No Firmwareheater power limiting
Read the temperature from the LCD
Record the power consumption onthe Lab PSU while passing certain temperatures
Please note that the temperatures in the table are thermistor embedded in the melting zone not the actual temperatures of the heating element especially at low temperatures.
The power in the table above has been deducted from the consumption of the controller board and LCD 1.03W.
▉Features:
Cylindrical ceramic heaters can be optimized and symmetrically heated materials
The thermistor is directly installed in the BLOCK to obtain a more realistic temperature reading when the material comes out of the hot end
Lightweight design, suitable for fast printing
Small compression size
Compatible with any V5/V6/CR10/HEMERA/MATRIX radiator, up to 300℃ degrees Celsius
Adding to cart succeed!
items in cart.
Total:
Requires a minimum purchase of {MinPrice}. And you still need to meet the requirements.
Proceed to Checkout Return to Shopping
