Note
All products purchased on this website are not include tax, including and not limited to: Consumption tax, Value added tax, customs duties, etc,
Before placing an order, please check your country's policies and regulations on online shopping taxes.
The amount you pay does not include tax and you will need to pay it yourself.
To purchase a tax-included products, please click the link below：
https://trianglelab.aliexpress.com/store/1654223
CHC PT1000 Matrix Extruder
Parameter
Max printingtemperature:285°C(upgradable to 450°C)
Mass:357g(including hotside)
Dimensions:66.7x44x78.7mm
Nominal steps per mm(16x): 335.4 steps per mm
(further calibration required)
Motor current:1.2A
Filament diameter and tolerances:1.75±0.05mm
Max pushing force:8.6kg Generic PLA
10mm/min @24V Driver
CHC PT1000
*Built-in PT1000 Thermistors
Supports temperatures up to 350℃
Matrix Bi-metal Heatbreak
Only Compatible with Trianglelab - Matrix Extruder
Matrix Gear
Wear resistant
High temperature resistant
Matrix Shell
robust
abrasion resistant
Matrix Motor
Number of Phase:2
Step Angle:1.8° deg.
Rated Voltage:2.73V
Rated Current/Phase:1.3A(Peak Value)
Phase Resistance:2.1Ω±10%(20℃)
Phase Inductance:3.8mH±20%(1kHz 1V RMS)
Holding Torque:3.0kg.cm
Insulation Class:B(130°);80K
Max
Weight:220g
4010DC 24V Fan
ow noise
What's in the box
Matrix Extruder Pre-assembled x1
CHC PT1000 Ceramic Heating Core x1
T-V6 Plated Copper 0.4mm Nozzle x1
4010DC 24V Fan x1
CHC Silicone Sock x1
