▇Name: Conch Hotend®
Perfect Fit for Flashforge AD5M/AD5M pro
Removable Nozzle: Quick-swappable nozzles for effortless upgrades.
Nozzle-Only Replacement: No full assembly change - cuts costs,
EndCoat™ Nozzle: 2.5× longer life than steel, lowers long-term costs.
Innovative Design: Precision-built for stable, efficient printing.
43mm³/s Flow: +17% max flow capacity.
Upgraded materialsuitable for the need ofhigh wear resistance
EndCoat™ Ultra-Wear-Resistant Coating Technology
Phaetus Proprietary Engineered for high-wear industrial components, this precision-applied coating enhances surface hardness and abrasion resistance on critical areas (nozzle tips/heatbreak throats), extending service life up to 2.5x.
█ Ultimate Cooling Design Precision Manufacturing Stable Printing
Innovative Cooling Structure Hollow-Chamber Extended Fin Design
Expands cooling surface area for rapid heat dissipation
Prevents material clogs caused by thermal expansion
Temperature Control Precision: 5%°C
Integrated thermistor design reduces measurement error
Micron-Level Precision Manufacturing Runice Standard
Inner Bore Surface Roughness
Ra ≤ 0.2 μm Ensures smooth filament flow & reduces residue buildup
Micron-level assembly tolerance
Ultra-precision manufacturing guarantees assembly tolerances, preventing material leakage at the source.
30-second Quick Nozzle Replacement
The Removable nozzle design reduces maintenance costs.
Hot Tightening Guide
To ensure proper hotend function and prevent nozzle leakage during printing, always perform hot tightening when installing or replacing nozzles. Nozzles tightened cold may develop gaps due to metal expansion when heated, causing material leakage.
Follow these steps strictly
1.Heat the nozzle
Heat nozzle to 250°C
2.Secure heater block
Use an open-end wrench to firmly secure the heater block and prevent rotation
3.Tighten nozzle
While securing heater block, use a socket wrench to tighten nozzle clockwise
CRITICAL SAFETY ALERT
CAUTION: High Temperature Hazard! Nozzle, heater block, and surrounding components remain extremely hot during entire procedure. ·NEVER make direct hand contact with heater block or nozzle ·ALWAYS use proper tools ·Wear heat-resistant gloves if close-range adjustment is needed
43mm³/s *
Unlock High-Speed Printing
Conch print time: 15H
17% higher flow rate
Standard Hotends print time:18h
