PT100 sensor

• Before ordering, please note that all our products do not include tax, you need to declare your own tax!

• If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.

• Technical questions e-mail：support@trianglelab.net

• Sales questions e-mail：sales@trianglelab.net

• The trianglelab has always been concerned about product quality.We are developing products and working hard to improve the quality.We will not abandon our reputation because of many cheap products on the market.It is believed that only high quality products can ensure the quality of your work and bring safety to your work.

• Some of our products may be more expensive than others,but please believe in our quality and believe that you will not regret when you receive the goods.

PT100's are high temperature,high accuracy temperature sensors that you can now on your V6 HotEnd instead of a thermistor or thermocouple.PT100's are able to measure higher temperatures than thermistors-upto 400C,and are more accurate then both thermistors and thermocouples in general.Our PT100 sensors are also very easy to handle,being of a metal cartridge construction that is secured with a set screw,no more fiberglass sleeving or clamping washer.
If you want experiment with printing the crazy high temperature materials,get more accurate temperature readings,and have a much more robust and easy to assemble temperature sensor then a PT100 is an ideal option.
This is a kit that provides everything you need to get up and running with a PT100 sensor on most machines.Requires a controller board that is running Marlin or Repetier with a spare analog input pin.
This kit contains a PT100 sensor,a heater block that is compatible with that sensor,an electrical amplifier board to connect the PT100 to your printer controller board,and the required screws for holding everything together.This kit is compatible with all HotEnds except for Cyclops and Volcano.
The PT100 sensor will not fit in the standard Hotends,but can be used with-v6,Chimera,Lite6,and Kraken by using the PT100 Heater Block available in the spares and extras section.
Please be aware that a PT100 is not the same as a thermistor and unless your electronics explicitly supports RTD Sensing devices you will need an amplifier board.
The Ultimaker 2 uses PT100 sensors by default,and this sensor allows you to connect your Hotend and Ultimaker electronics with no alteration to the electronics or firmware of the Ultimaker 2.
If you want the thermistor sensor that can fits on your hotend please click below.

Set 1:

We also provide:
PT100 Temperature Sensors inHRER
PT100 Amplifyer Board inHERE

1 X PT100 Thermistor Cartridge
1 X PT100 Amplifier Board
Cables For Connect To Main Board
2 x M3 x 10 Socket Dome Screw(for securing heater cartridge)
2 x M3 Grub Screws(for securing thermistor)