MOSFET

Name: MOSFET
Brand: Trianglelab Official Website
SKU: 285
Price: 9.41 USD
Availability: InStock

0.0 (0)

$9.41 ~~$9.90~~

3D Printer Heated Bed Power Module High Current SSR KIT MOSFET upgrade RAMPS 1.4 reprap free shipping

Received successfully

Coupon Code

CONTINUE SHOPPING

Description

This SSR kits allows you to heat up high-power hotbed or some other heating element that may cause damage to your main board.
This kit compatible to any kind of main board on market.
This kit is already contained a big heat sink with mounting holes allows you install it in your printer very easily.
With the heat sink and proper cooling this SSR can handle upto 40 amperes current.

Avoid the big current burn your mostfet and connectors on your mainboard.
Control a higher voltage hotbed powered by a different voltage PSU in your printer such as an 48V 10A hotbed.
Control an 110V/220V AC silicon heaters or some other AC heating element.
Due to this kit can controled by any aux pins on your mainboard it can save one mosfet output and you can using it to control some extra hotend fans or illuminations on your printer.
Control the main circuit that power all the heaters on your printer.If something goes wrong during heatings the SSR will cut all the main circuit to avoid disasters,especially the mosfet can't turned off situation.You can find this kind of features in every firmware.(reference M80 M81command)

1 x 40A Solid-State Relay DC-DC/DC-AC
1 x heat sink
2 x m4*6 screws for mounting the SSR to the heat sink
1 x Thermal Grease
1 x Control Wire for connect the SSR to your mainboard
2 x Wire Terminals for connecting 14-10AWG wires