Note
All products purchased on this website are not include tax, including and not limited to: Consumption tax, Value added tax, customs duties, etc,
Before placing an order, please check your country's policies and regulations on online shopping taxes.
The amount you pay does not include tax and you will need to pay it yourself.
To purchase a tax-included products, please click the link below：
https://trianglelab.aliexpress.com/store/1654223
If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.
The trianglelab has always been concerned about product quality.We are developing products and working hard to improve the quality.We will not abandon our reputation because of many cheap products on the market.It is believed that only high quality products can ensure the quality of your work and bring safety to your work.
Some of our products may be more expensive than others,but please believe in our quality and believe that you will not regret when you receive the goods.
▉Preface:
This product is developed and manufactured by our partner company(PHAETUS). The product quality is very high. We guarantee that you will continue to purchase high-quality products in Triangle Lab. Hope fans like it.
Heatebreaker performance comparison test
prusa I3 MKS3 print head
nozzle temperature 215℃
ambient temperature 22℃
temperature probe depth 40+-0.5mm from top plate of heatsink
cooling fan Noctua NF-A4x10 5V
Read the temperature 15mins after nozzle stable at 215℃
thermal paste was applied in between the heatbreak and heatsink model:shin-etsu 7868 6.2W/m °K
both setup share the same heater block thermistor nozzle and cooling fan
only the heatebreaker and heatsink is diffent
Result: lower is better
. V6 standard(M7) stainless-steel heat breaker39.1℃
. V6 standard(M7) titanium alloy heat breaker34.1℃
. Dragonfly BMO(V6 Compatible)32.2℃
]
▉Dragonfly-BMO:
▉Dragonfly-BMS:
♦
Product Detail presentation:
﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋
﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋﹋
Heatebreaker performance comparison test
prusa I3 MKS3 print head
nozzle temperature 215℃
ambient temperature 22℃
temperature probe depth 40+-0.5mm from top plate of heatsink
cooling fan Noctua NF-A4x10 5V
Read the temperature 15mins after nozzle stable at 215℃
thermal paste was applied in between the heatbreak and heatsink model:shin-etsu 7868 6.2W/m °K
both setup share the same heater block thermistor nozzle and cooling fan
only the heatebreaker and heatsink is diffent
Result: lower is better
. V6 standard(M7) stainless-steel heat breaker39.1℃
. V6 standard(M7) titanium alloy heat breaker34.1℃
. Dragonfly BMO(V6 Compatible)32.2℃
