• CR10 heatsink
  • CR10 heatsink
  • CR10 heatsink
  • CR10 heatsink
  • CR10 heatsink
1/1
  • CR10 heatsink
  • CR10 heatsink
  • CR10 heatsink
  • CR10 heatsink
  • CR10 heatsink

CR10 heatsink

trianglelab CR10 heatsink All Metal Hotend upgrade Kit for CR-10 Ender3 Printers micro swiss CR10 hotend Titanium heat breaker
0.0 (0 Reviews)
$12.90 $15.72
Received successfully
Coupon Code
CONTINUE SHOPPING
    Please select the information you want X
  • MODE:
    CR10 HeatSink
    Titanium Alloy Break
    ALL CR10 upgrade Kit
Quantity
-
+
  • Description
Swiss MK10 Hotend Kit *Compatible with ENDER-3 ender-5 cr-10 3D Printer.
*CompatibleNTC 100K 3950 ThermistorsensorOR104GT-2 Thermistor sensor
*If you would like to purchase the full version of HOTEDN,please click here to purchase.
*The above is our recommended item. If you are interested. You can click on the picture directly. If you are a mobile app user. Then you can go to our store and thank you for your support.
Compatible:
Compatible with CR-10S
Compatible with CR-10S -S5
Compatible with CR-10S -S4
Compatible with CR-10
Compatible with CR-10 -MINI
Compatible with CR-20
Compatible with CR-20 PRO
Compatible with Ender2
Compatible with Ender3
Compatible with Ender3 PRO
Compatible with TronXY X5S
Compatible with Tevo Tornado
Compatible with Alfawise U20
Recommended slicer setting:
retraction speed over 80MM/S
retraction length 2.5-4MM
If you are facing PLA clogging problem, please try the followings:
1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"
2. Increase the extruder  acceleration. Check your firmware settings. G-command "M201 E9000"
3. Reduce the retraction length. It depends on your machine setup.
4. Increase the nozzle temperature by 5-10 degrees.
5. Do not install the 2 screws for support the heatblcok like the stock hotend on the
CR-10 printer.
6. Make sure that there is no gap between the heatsink and the heat breaker.

SET 1-CR10 HeatSink:
·Aluminum CR10 HeatSinkX 1

SET 2 - CR10 Heat Break:
·Titanium Alloy Heat Break X 1

SET 3 - CR10 Upgrade Kit:
·Aluminum CR10 HeatSink X 1
·Titanium Alloy Heat Break X 1
·Gift X 1

*Compatible with ENDER-3 ender-5 cr-10 3D Printer.
Please read here:
This is a drop in All Metal Conversion kit for CR-10 printers. It requires absolutely zero modification to your printer to install. Our uniquely designed cooling block eliminates need for a thermal tube. By not having separate thermal tube inside cooling block, it allows for faster heat dissipation.
Thermal heat break is made from Titanium Alloy to provide excellent thermal isolation between heater and cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creating more defined meltzone.





 

Frequently Bought Together
more
Frequently Bought Together
Customer Reviews
0.0 0 Reviews
Write a review

Adding to cart succeed!

items in cart.

Total:

Requires a minimum purchase of {MinPrice}. And you still need to meet the requirements.

Proceed to Checkout Return to Shopping